Instructions
1. Start by removing the headrests from your Toyota Tacoma truck. To do this, pull them straight up to release them from the seatback.
2. Place the Wet Okole seat cover over the seat, making sure that the cover is centered on the seat. Make sure that the opening for the headrest is at the top of the seat cover.
3. Secure the cover to the seat by using the included adjustable straps. Start by securing the two straps at the bottom of the seat, then the two straps on the sides, and finally the two straps at the top.
4. Insert the headrests back into the seat back, and make sure they are securely in place.
5. Pull down on the seat cover to ensure that it is securely in place.
Installing Wet Okole seat covers in a Toyota Tacoma is a relatively easy process that requires only a few tools and a bit of know-how. The first step is to remove the original factory seat covers and foam from the Tacoma’s seats. To do this, you will need a Phillips screwdriver and a flathead screwdriver. Start by removing the screws from the back of the Toyota Tacoma seat. Once the screws are removed, the seat cover and foam can be removed carefully.
Next, take the Wet Okole seat covers out of the package. The seat covers should be laid out flat on a clean surface. Run your hands over the covers to ensure they are free of any wrinkles. If there are any wrinkles, use a hairdryer or steam cleaner to remove them.
Once the Wet Okole seat covers are wrinkle-free, it’s time to install them in the Toyota Tacoma. Start by putting the bottom of the seat cover over the bottom of the seat and checking to make sure it is snug. Once the bottom is secure, pull the sides of the seat cover up and around the sides and back of the seat. You may need to use a Phillips screwdriver to tighten the screws along the edges.
Finally, use a flathead screwdriver to tuck the excess fabric into the creases of the seat. This will help keep the seat cover in place and prevent it from slipping. Once the seat cover is neatly tucked in, it is ready to be used. With a little bit of know-how and the right tools, installing Wet Okole seat covers in a Toyota Tacoma is a relatively easy process.